
3M Certified Headlight Lens Restoration Facility
for Martin, St. Lucie, Palm Beach,Okeechobee & Broward
Do your headlights appear clouded, foggy or dirty?
Do your headlight beams appear dim when you drive at night?

Certified
Headlight Lens Restoration Facility
We use up to a 6 step process to refine and polish your lens to a like-new finish.
|
What is the problem with those yellow foggy headlights?
Polycarbonate plastic is used because of its tensile strength and the ability to be manufactured to conform to the front end styling of a vehicle. Although it's a very hard plastic, it's also very porous so during manufacturing a protective hard coat is applied to the headlight lens. This hard coat is supposed to protect the headlight lens from intense sun, heat, road chemicals, bugs, humidity and acid rain, etc. These elements over time damage the protective hard coat to the point that a ugly discolored, cloudy, hazy appearance develops on the lenses. This damage will restrict the headlights ability to project its beam of light at night, and during adverse weather conditions, may diminish the ability to see by as much as 90%.
If you have cloudy or worn and yellow headlights you are taking a big and unnecessary risk when you drive at night. According to the AAA Foundation For Traffic Safety: An average of 9 out of every 10 cars on the road today has dirty or yellowed headlights that greatly reduce vision and need to be replaced, repaired or restored.
Most people do not know that not only do worn or cloudy headlights look bad, but they also reduce light output by as much as 95 percent. That is a huge difference in whether you can effectively see or be seen when driving at night.
Thousands of accidents were linked to ineffective light output due to worn and cloudy headlights. The majority of headlight lenses produced today are made of plastic and are very susceptible to road and weather conditions. Harsh UV rays in hot climates, chemicals from the engine and fumes, smog, etc. all take a toll on the plastic and cause it to breakdown from the outside in. The resulting cloudiness is like cancer and quickly gets worse. Soon reducing visibility and making your vehicle unsafe at night.
According to the National Institute For Highway Safety: Accidents at night due to a more limited visibility are usually of a more severe nature, but when equipped with ineffective headlights the chances for a more severe accident are far greater.
Have your headlight lens professionally restored for maximum light output and safety. Dirty headlights can and will decrease visibility by as much as 90%.
Up until now the only solutions were to either replace the cloudy lenses or to just take the risk and drive with the bad headlights. Now there is an alternative, headlight restoration. You can restore these cloudy headlights to like new condition and be safe again. Restored headlights look new and have the same light output and safety of new headlights for a fraction of the cost.
We offer additional protection to newly polished lens and new vehicle lens with the installation of Headlight Protection Films
Clear
Our 8 mil or 30 mil protective film gives clear protection.
Allows 100% of light output.
Computer cut and installed at our shop
Designed for headlights, driving lamps or fog lights.
Automotive Candystore would like to stay in contact with you.
Email your address and name to the Automotive Candystore and we will include you on our "Store Specials" e-mailer.